How to make soy candles - an online candle making guide

Welcome to Color Me Kevin ColorMeKevin is an online resource for hobbyists of all types.
Included on this site, you will find information about
Natural Soap Making, Candle Making, Pinhole Photography,
Freshwater Aquariums, Do it Yourself projects,
Stange hobbies and more.
Enjoy!

Please visit the links below. They help fund our site. For RECOMMENDED links, please visit our LINKS sections.

HOME :: Soap :: Candles :: Fish :: Wine :: Contact

How to Make a Soap Mold

How to Make a Soap Cutter

Soy Candle Making

Which Soy Wax to Use?

Hot to Make Soy Candles

Candle Making Supplies

Candle Links

Fish & Aquarium

My Tank Photos

Starting a Planted Aquarium

Aquascaping Your Aquarium

Aquarium Links

How to Make Wine

The Basics of wine making

Tools & Equipment

Wine Making Links

Photography

How to build a pinhole camera

How to Develop Your Own B&W Film

How To Make Soy Candles
Disclaimer: Making candles involves the use of a stove, hot wax, and occasional chemicals. Please take all safety precautions possible. Remember to use potholders when picking up hot pots, and wear safety glasses when measuring & mixing scents. These directs are simply a guide to how I make my candles. There is no claim that this is the only way, or even the correct way, but it works for me!

	What you need: • Scale (Anything that measures in oz should be fine.) • Double Broiler (a large pot and a smaller pouring pot work well for this) • Thermometer • Wax (I use EcoSoya CB-135 container wax) • Container for candles • Wicks • Hot Glue Gun • Scent (optional) • Color (optional)
	Measure Wax: For your first time making candles, a pound of wax is a good place to start. When measuring, it is important to use weight instead of volume. Volume is different depending on the temperature. Weight is the only consistent way to measure materials.
	Melt Wax: Now that your wax is measured, add the wax to a double broiler. I don't like cleaning, so I try to use as few pots as possible. To do this, I simply put the wax into the pour pot , then put the pour pot into a pot of hot water. Turn the burner on your stove on, and boil the water in the lower pot to melt the wax. The double boiler will help prevent your wax from burning.
	As your wax melts, be sure to watch and stir continually. Tip: If you use your thermometer to stir, there's one less thing you have to wash!
	Wick Containers: While your wax is melting, take the opportunity to wick your containers. There are numerous ways to do this, and I probably use the worst method. I simply dip the wick tabs in the melting wax, and press them into the bottom CENTER of the container. Be sure they are as close to center as you can make them. Flipping the glass upside down and looking through the bottom of the container will help you center the wick a bit easier. Two better ways to do this are a hot glue gun, and wick tabs/glue dots. They're faster and easier than the wax method...I don't know why I'm still using the other method. UPDATE: Don't be a dummy like me! Use a Hot Glue Gun! I just started using one....boy is it easier!
	Now, you have to make sure your wicks are going to stand up straight so your finished candles burn properly. For this, I take a piece of scotch tape and cut a slot in the center of it. Once you have the tape prepared, gently slide it over the wick, and stretch the tape across the top of the container, centering the wick. A better way to do this would be with little metal tools they call wick bars. They are a quick easy way to keep your wicks straight.
	Prepare all of your containers the same way so they are ready to be poured. At this point, you may want to warm them in a low oven..this is optional, but sometimes helps the candles cool better. Just warm them until they are warm to touch.
	By now, your wax should be melted. You want the temperature to get up to around 160-175 degrees. Once the wax hits that temperature range, you can remove the wax from the hot water bath.
NO PHOTO	Mix in Your Dye: Now is the time to mix in your dye. I recommend using liquid dyes. They are the fasted easiest way to color your candles. One drop will go a long way. If you want pastel candles, one drop should be plenty for a pound. You may want to use as many as 6-8 drops for darker colored candles.
	Allow the Wax to Cool: Cool the wax to your pouring temperature. I generally pour EcoSoya CB-135 at 125 degrees. This give me a smooth top, and good adhesion on the sides of the container. Watch your temperature the wax will initially cool faster than you expect, but once it gets to 130 degrees of so, it will start to cool a bit slower. TIP: If your used my terrible wax method of putting your wicks in, you way want to pour a small bit wax into the bottom of the container around the wick. This will cool in a few minutes and hold your wick in place a bit better when your are pouring your wax in a bit.
	Measure Scent: While your wax is cooling, take a moment to measure your scent. A general rule of thumb for scent in candles is 1 ounce of scent per pound of wax.
	Add Scent: When the wax is a few degrees away from your pouring temperature, it is time to add your fragrance. Slowly pour the fragrance in while stirring the wax. Continue stirring for a few moments to ensure the fragrance has been thoroughly incorporated into the wax.
	Pour Candles: Once your wax has reached your pouring temperature, it is time to make the candles. Simply pour the wax into the bottom of the container in a slow, steady stream-That's all there is to it!
	Allow Candles to Cure: Your candles are going to need a long time to cure. You should leave them alone for at least 24 hours . (Candles over two pounds may need even more time to cure) Try not to move them around during the curing period.
	If done correctly, you should have nice smooth tops on your candles, and they should be adhered all around the sides of your container.
	That's it! Your Done., Cut the wicks to 1/4" and enjoy your candles!